Gather all the parts to build a fixed gear bike.You need an IRO CYCLE frameset, fork, headset, stem, handlebars, seatpost, seat, seatpost collar, bottom bracket, crank, crank bolts, chainring, chain, pedals, cog and don't forget the wheels and tires. Click picture to enlarge. The next step is to set up the IRO CYCLE frame. Install the headset, bottom bracket, seatpost collar, seatpost, and the seat.     Click picture to enlarge. Let's set up the front end. Install the fork(cut the fork to the proper length and don't forget the star washer), stem, handlebar and the front wheel. Click picture to enlarge. Now the drivetrain. We will install the crank(with chainring),pedals, rear wheel(with cog), pedals and the chain(trim the chain to the proper length). Click picture to enlarge. Adjust and tighten everything. Set the chain nice and tight(you don't want it falling off while riding).Make sure the stem and handlebars are tight. Set the seat hight and take it for a short ride. After the ride readjust anything you feel needs to be adjusted(seat hight, angle of the headlebars, etc....).At this point if you want to add goodies go ahead(handlebar tape,water bottles,etc....). Your done! GO RIDE ! Click picture to enlarge.

Last updated on